Magnetic Separator factory

[fdawdW1dsfcae]

Magnetic Separator factory Product Details

Magnetic plate, also known as a magnetic separator plate or magnetic filter plate, is a type of magnetic separator used to remove ferrous contaminants from free-flowing materials such as liquids, powders, and granules. Magnetic plates are designed to be installed above or below the conveyor belt or material chute and can be customized to fit different conveyor belt sizes.

Application

Magnetic plates are used in a variety of industries, including food and beverage, pharmaceuticals, chemicals, plastics, and recycling. They are particularly useful for removing ferrous contaminants from free-flowing materials that cannot be removed by other means, such as screens or filters. Magnetic plates can also be used as a pre-filtration step to protect downstream equipment, such as pumps or valves, from damage due to ferrous contamination.

Advance

One advantage of magnetic plates is their low maintenance requirements. They are typically self-cleaning and require minimal operator intervention, making them a cost-effective solution for removing ferrous contaminants from a variety of materials. However, it is important to note that magnetic plates are not effective at removing non-ferrous contaminants, such as aluminum or copper, and may require additional filtration steps to remove these contaminants.

FAQ

1. How the magnetic plate filter should be installed
Usually the magnetic plate separator is installed on top of the conveyor, and depending on the length, width and material density of the conveyor, more than one can be installed. They can be installed at least 1 meter (1.1 yards) apart in the longitudinal direction, or in the transverse direction, side by side (covering the width of the material on the belt).
2. How do I select a plate magnetic filter and a magnetic roller?
Usually plate magnetic filters and magnetic rollers can be used in combination to enhance the filtration effect. The suspended plate magnetic filter can absorb larger ferrous contaminants and parts. The magnetic roller can adsorb and unload contaminants by itself, so it is more suitable for continuous work.Magnetic Separator factory
website:http://www.magneticclear.com/magnetic-separator/